gcs-nf/App/ToolsUI/PowerSystem/PowerSystem.cpp

#include "PowerSystem.h"
#include "ui_PowerSystem.h"

PowerSystem::PowerSystem(QWidget *parent) :
    ToolsWidget(parent),
    ui(new Ui::PowerSystem)
{
    ui->setupUi(this);

    setWindowTitle(tr("PowerSyste"));

    //load qss
    QFile file(":/qss/PowerSystem.qss");
    file.open(QFile::ReadOnly);
    QTextStream filetext(&file);
    QString stylesheet = filetext.readAll();
    this->setStyleSheet(stylesheet);
    file.close();

    //设置label
    /*
    setColor(ui->label_RS,state::success);
    setColor(ui->label_NMS,state::success);
    setColor(ui->label_ITP,state::success);
    setColor(ui->label_CR,state::success);
    setColor(ui->label_ITT,state::success);
    setColor(ui->label_RPM_mea,state::success);
    setColor(ui->label_RM,state::success);
    setColor(ui->label_ATP,state::success);
    setColor(ui->label_T5,state::success);
    setColor(ui->label_TRPM,state::success);
    */


    //设置灯
    setColor(ui->checkBox_1,state::success);
    setColor(ui->checkBox_2,state::success);
    setColor(ui->checkBox_3,state::success);
    setColor(ui->checkBox_4,state::success);
    setColor(ui->checkBox_5,state::success);
    setColor(ui->checkBox_6,state::success);
    setColor(ui->checkBox_7,state::success);
    setColor(ui->checkBox_8,state::success);
    setColor(ui->checkBox_9,state::success);
    setColor(ui->checkBox_10,state::success);
    setColor(ui->checkBox_11,state::success);
    setColor(ui->checkBox_12,state::success);
    setColor(ui->checkBox_13,state::success);
    setColor(ui->checkBox_14,state::success);
    setColor(ui->checkBox_15,state::success);
    setColor(ui->checkBox_16,state::success);
    setColor(ui->checkBox_17,state::success);
    setColor(ui->checkBox_18,state::success);
    setColor(ui->checkBox_19,state::success);
    setColor(ui->checkBox_20,state::success);
    setColor(ui->checkBox_21,state::success);


   cmdList.insert(0x13,"冷运转");
   cmdList.insert(0x43,"停车");
   cmdList.insert(0x73,"紧急停车");
   cmdList.insert(0x15,"地面起动");
   cmdList.insert(0x25,"空中起动");
   cmdList.insert(0x45,"给定转速");
   cmdList.insert(0x75,"开半加力（基准档）");
   cmdList.insert(0x1c,"开半加力（1档）");
   cmdList.insert(0x2c,"开半加力（2档）");
   cmdList.insert(0x3c,"开半加力（3档）");
   cmdList.insert(0x4c,"开半加力（4档）");
   cmdList.insert(0x5c,"开半加力（5档）");
   cmdList.insert(0x6c,"开半加力（6档）");
   cmdList.insert(0x7c,"开半加力（7档）");
   cmdList.insert(0x8c,"开半加力（8档）");
   cmdList.insert(0x9c,"开半加力（9档）");
   cmdList.insert(0x85,"开全加力（基准档）");
   cmdList.insert(0x16,"开全加力（1档）");
   cmdList.insert(0x26,"开全加力（2档）");
   cmdList.insert(0x36,"开全加力（3档）");
   cmdList.insert(0x46,"开全加力（4档）");
   cmdList.insert(0x56,"开全加力（5档）");
   cmdList.insert(0x66,"开全加力（6档）");
   cmdList.insert(0x76,"开全加力（7档）");
   cmdList.insert(0x86,"开全加力（8档）");
   cmdList.insert(0x96,"开全加力（9档）");
   cmdList.insert(0xb5,"关加力");
   cmdList.insert(0xd5,"手动转速控制");
   cmdList.insert(0x19,"核心机主燃油泵");
   cmdList.insert(0x29,"加力主燃油泵");
   cmdList.insert(0x49,"加力点火燃油泵");
   cmdList.insert(0x79,"尾喷口舵机");
   cmdList.insert(0x89,"点火器");
   cmdList.insert(0xb9,"起动控制1");
   cmdList.insert(0xd9,"起动控制2");
   cmdList.insert(0x1a,"核心机点火油阀");
   cmdList.insert(0x2a,"核心机优先油阀");
   cmdList.insert(0x4a,"核心机轻吹油阀");
   cmdList.insert(0x7a,"核心机起动气阀");
   cmdList.insert(0x8a,"核心机主油阀");
   cmdList.insert(0xba,"加力主油阀");
   cmdList.insert(0xda,"加力轻吹阀");
   cmdList.insert(0xea,"加力点火快速阀");


   ScopeRPM = new Chart(ui->frame_RPM);
   ScopeTemp = new Chart(ui->frame_Temp);
   ScopeAlt = new Chart(ui->frame_Alt);
   ScopeMa = new Chart(ui->frame_Ma);
/*
   ScopeRPM->chart()->axisX()->hide();
   ScopeTemp->chart()->axisX()->hide();
   ScopeAlt->chart()->axisX()->hide();
   ScopeMa->chart()->axisX()->hide();
   */

   ScopeRPM->chart()->legend()->setAlignment(Qt::AlignRight);
   ScopeTemp->chart()->legend()->setAlignment(Qt::AlignRight);
   ScopeAlt->chart()->legend()->setAlignment(Qt::AlignRight);
   ScopeMa->chart()->legend()->setAlignment(Qt::AlignRight);


   ScopeRPM->setOperation(false);
   ScopeTemp->setOperation(false);
   ScopeAlt->setOperation(false);
   ScopeMa->setOperation(false);

   ScopeRPM->setRenderHint(QPainter::Antialiasing);
   ScopeTemp->setRenderHint(QPainter::Antialiasing);
   ScopeAlt->setRenderHint(QPainter::Antialiasing);
   ScopeMa->setRenderHint(QPainter::Antialiasing);
}

PowerSystem::~PowerSystem()
{
    delete ui;
}

void PowerSystem::resizeEvent(QResizeEvent *event)
{
    ScopeRPM->setGeometry(0,0,ui->frame_RPM->width(),ui->frame_RPM->height());
    ScopeTemp->setGeometry(0,0,ui->frame_Temp->width(),ui->frame_Temp->height());
    ScopeAlt->setGeometry(0,0,ui->frame_Alt->width(),ui->frame_Alt->height());
    ScopeMa->setGeometry(0,0,ui->frame_Ma->width(),ui->frame_Ma->height());


}

void PowerSystem::mousePressEvent(QMouseEvent *event)
{
    if(event->button() == Qt::RightButton)
    {
        //qDebug() << event;
    }
}

void PowerSystem::setTurbineState(mavlink_turbinestate_t *t)
{
    QString runState;
    switch (t->SysState & 0x000F) {
    case 0x00: runState = "静止"; break;
    case 0x01: runState = "地面检查"; break;
    case 0x02: runState = "冷运转"; break;
    case 0x03: runState = "（预留）"; break;
    case 0x04: runState = "停车"; break;
    case 0x05: runState = "地起"; break;
    case 0x06: runState = "空起（预留）"; break;
    case 0x07: runState = "手动"; break;
    case 0x08: runState = "安全"; break;
    case 0x09: runState = "稳态"; break;
    case 0x0a: runState = "减速"; break;
    case 0x0b: runState = "加速"; break;
    case 0x0c: runState = "关加力"; break;
    case 0x0d: runState = "加力点火"; break;
    case 0x0e: runState = "半加力"; break;
    case 0x0f: runState = "全加力"; break;
    }
    setValue(ui->label_RS,runState);

    float cr = 0;

    if(t->P1t != 0)
    {
        cr = ((float)t->P5t * 1.0f)/t->P1t;
        setValue(ui->label_CR,QString::number(cr,'f',3));
    }
    else
    {
        cr = 0;
        setValue(ui->label_CR,QString::number(0));
    }

    if(t->SysState & 0x0010)
    {
        setValue(ui->label_RM,"正式运行");
    }
    else
    {
        setValue(ui->label_RM,"地面调试");
    }

    if((t->SysState & 0x0020) > 0)
    {
        setValue(ui->label_NMS,"N2传感器");
    }
    else{
        setValue(ui->label_NMS,"N1传感器");
    }

    setValue(ui->label_P5t,QString::number(t->P5t,'f',1));
    setValue(ui->label_RPM_mea,QString::number(t->RPM_mea,'f',0));
    setValue(ui->label_T5,QString::number(t->T5 * 0.1 - 273.15,'f',1));
    setValue(ui->label_Kfuel,QString::number(t->Kfuel,'f',1));
    setValue(ui->label_RPM_des,QString::number(t->RPM_des,'f',0));
    setValue(ui->label_RPM_des_ap,QString::number(t->RPM_des_ap,'f',0));
    setValue(ui->label_stage_ap,(t->stage_ap == 1)?(tr("正常档位")):(tr("加速档")));
    setValue(ui->label_temp_ap,QString::number(t->temp_ap + 200 - 273.15,'f',1));
    setValue(ui->label_tas_ap,QString::number(t->tas_ap*10.0,'f',1));
    setValue(ui->label_asl_ap,QString::number(t->asl_ap*100.0,'f',1));
    setValue(ui->label_KabMain,QString::number(t->KabMain*30.0,'f',1));
    setValue(ui->label_KabFire,QString::number(t->KabFire*30.0,'f',1));
    setValue(ui->label_KDj,QString::number(t->KDj*30.0,'f',1));
    setValue(ui->label_T1t,QString::number(t->T1t + 200 - 273.15,'f',1));
    setValue(ui->label_P1t,QString::number(t->P1t,'f',1));
    //setValue(ui->label_CR,QString::number(((float)t->P5t)/t->P1t,'f',1));
    setValue(ui->label_DJS,QString::number(t->DJS / 4.0,'f',1));
    setValue(ui->label_Vcc,QString::number(t->Vcc / 5.0,'f',1));

    setValue(ui->label_P3t,QString::number(t->P3t,'f',0));
    setValue(ui->label_rP51_Def,QString::number(t->Tbak * 0.01,'f',2));
    setValue(ui->label_Wf_Def,QString::number(t->RPM_bak,'f',0));


    //setValue()


    //setValue(ui->label_Tbak,QString::number(t->Tbak,'f',1));
    //setValue(ui->label_RPM_bak,QString::number(t->RPM_bak,'f',1));
    //setValue(ui->label_IOState,QString::number(t->IOState,'f',1));
    //setValue(ui->label_SysState,QString::number(t->SysState,'f',1));
    //setValue(ui->label_Fault,QString::number(t->Fault,'f',1));
    //setValue(ui->label_rev,QString::number(t->rev,'f',1));
    setValue(ui->label_CFuelMode,QString::number(t->CFuelMode,'f',1));


    setValue(ui->label_Cmd,cmdList.value(t->Cmd));


    setColor(ui->checkBox_1,((t->SysState & 0x0100) > 0)?(state::failure):(state::success));
    setColor(ui->checkBox_2,((t->SysState & 0x0200) > 0)?(state::failure):(state::success));
    setColor(ui->checkBox_3,((t->SysState & 0x0400) > 0)?(state::failure):(state::success));
    setColor(ui->checkBox_4,((t->SysState & 0x0800) > 0)?(state::failure):(state::success));
    setColor(ui->checkBox_5,((t->SysState & 0x1000) > 0)?(state::failure):(state::success));
    setColor(ui->checkBox_6,((t->SysState & 0x2000) > 0)?(state::failure):(state::success));
    setColor(ui->checkBox_7,((t->SysState & 0x4000) > 0)?(state::failure):(state::success));

    setColor(ui->checkBox_8,((t->Fault & 0x0001) > 0)?(state::failure):(state::success));
    setColor(ui->checkBox_9,((t->Fault & 0x0002) > 0)?(state::failure):(state::success));
    setColor(ui->checkBox_10,((t->Fault & 0x0004) > 0)?(state::failure):(state::success));
    setColor(ui->checkBox_11,((t->Fault & 0x0008) > 0)?(state::failure):(state::success));
    setColor(ui->checkBox_12,((t->Fault & 0x0010) > 0)?(state::failure):(state::success));
    setColor(ui->checkBox_13,((t->Fault & 0x0020) > 0)?(state::failure):(state::success));
    setColor(ui->checkBox_14,((t->Fault & 0x0040) > 0)?(state::failure):(state::success));
    setColor(ui->checkBox_15,((t->Fault & 0x0080) > 0)?(state::failure):(state::success));
    setColor(ui->checkBox_16,((t->Fault & 0x0100) > 0)?(state::failure):(state::success));
    setColor(ui->checkBox_17,((t->Fault & 0x0200) > 0)?(state::failure):(state::success));
    setColor(ui->checkBox_18,((t->Fault & 0x0400) > 0)?(state::failure):(state::success));
    setColor(ui->checkBox_19,((t->Fault & 0x0800) > 0)?(state::failure):(state::success));
    setColor(ui->checkBox_20,((t->Fault & 0x1000) > 0)?(state::failure):(state::success));
    setColor(ui->checkBox_21,((t->Fault & 0x2000) > 0)?(state::failure):(state::success));


    ScopeRPM->setSerieData(tr("物理"),t->RPM_mea);
    ScopeRPM->setSerieData(tr("期望"),t->RPM_des);

    ScopeTemp->setSerieData(tr("压比"),cr);

    //从新做一个函数
     ScopeAlt->setSerieData(tr("Wf测"),t->P3t);

}


void PowerSystem::setCCMState(mavlink_ccmstate_t *t)
{
    ui->label_STEMP1->setText(QString::number(t->temp[0] * 0.1,'f',1));
    ui->label_STEMP2->setText(QString::number(t->temp[1] * 0.1,'f',1));
}


void PowerSystem::setFuel(QVariant press, QVariant value)
{
    setValue(ui->label_fuelpress,press.toString());
    setValue(ui->label_fuelvalue,value.toString());
}



void PowerSystem::setMa(QVariant Ma)
{
    ScopeMa->setSerieData(tr("马赫"),Ma);
}

void PowerSystem::setAlt(QVariant Alt)
{
    //ScopeAlt->setSerieData(tr("海拔"),Alt);
}