/*
 * Baro_MS4525DO.h
 *
 *  Created on: Jun 22, 2020
 *      Author: matth
 */

#ifndef MATT_BARO_MS4525DO_H_
#define MATT_BARO_MS4525DO_H_

#include "I2CDevice.h"
#include <FreeRTOS.h>

/*
 * The I2C address consists of a 7-digit binary value.
 * The factory setting for I2C slave address is 0x28, 0x36 or
 * 0x46 depending on the interface type selected from the ordering information.
 * The address is always followed by a write bit (0) or read bit (1).
 * The default hexadecimal I2C header for read access to the sensor is therefore 0x51,
 * 0x6D, 0x8D respectively, based on the ordering information.
 */
#ifndef HAL_BARO_MS4525_I2C_ADDR
#define HAL_BARO_MS4525_I2C_ADDR 0x28
#endif

typedef enum {
	Baro_MS4525_typeA,
	Baro_MS4525_typeB
} Baro_MS4525_type;

typedef struct Baro_MS4525{
    const char *name;
    I2C_DEV_t *_dev;
    int32_t Prange;
    int32_t Pmin;
    Baro_MS4525_type   typeAB;
    int32_t pressure; /* Pa */
    int16_t temp; /*degC -50~150 */
    uint8_t status;
} Baro_MS4525_t;

bool Baro_MS4525_init(Baro_MS4525_t *baro, const char *name, I2C_DEV_t *dev, int Pmax, int Pmin, Baro_MS4525_type typeAB);

bool Baro_MS4525_update(Baro_MS4525_t *baro);



#endif /* MATT_BARO_MS4525DO_H_ */